[robotics-worldwide] CFP: ICINCO 2006

Juan Andrade Cetto cetto at cvc.uab.es
Tue Feb 21 06:57:16 PST 2006


3rd International Conference on Informatics in Control, Automation and 
Robotics, Steubal Portugal, 1-5 August, 2006.

Full Paper Submission: 27th February, 2006
Authors Notification: 17th April, 2006
Final Paper Submission and Registration: 8th May, 2006

ICINCO is organized by INSTICC - Institute for Systems and Technologies 
of Information, Control and Communication.


SCOPE

The purpose of the 3rd International Conference on Informatics in 
Control, Automation and Robotics (ICINCO) is to bring together 
researchers, engineers and practitioners interested in the application 
of informatics to Control, Automation and Robotics. Three simultaneous 
tracks will be held, covering Intelligent Control Systems, Optimization, 
Robotics, Automation, Signal Processing, Systems Modeling and Control.

Informatics applications are pervasive in many areas of Control, 
Automation and Robotics; This conference intends to emphasize this 
connection, therefore, authors should highlight the benefits of 
Information Technology (IT) in these areas. Ideas on how to solve 
problems using IT, both in R&D and industrial applications, are welcome. 
Papers describing advanced prototypes, systems, tools and techniques and 
general survey papers indicating future directions are also encouraged. 
Papers describing original work are invited in any of the areas listed 
below. Accepted papers, presented at the conference by one of the 
authors, will be published in the Proceedings of ICINCO, with an ISBN. 
Acceptance will be based on quality, relevance and originality. Both 
full research reports and work-in-progress reports are welcome. There 
will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial 
presentations, as well as tutorials dedicated to technical/scientific 
topics are also envisaged: companies interested in presenting their 
products/methodologies or researchers interested in holding a tutorial 
or organizing a workshop are invited to contact the conference 
secretariat. Additional information can be found at http://www.icinco.org/.


CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is 
not exhaustive. Papers may address one or more of the listed sub-topics, 
although authors should not feel limited by them. Unlisted but related 
sub-topics are also acceptable, provided they fit in one of the 
following conference areas:

    1. Intelligent Control Systems and Optimization
    2. Robotics and Automation
    3. Signal Processing, Systems Modeling and Control

AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION

       Decision support systems
       Distributed control systems
       Expert systems for industry
       Intelligent fault detection and identification
       Knowledge-based systems applications
       Machine learning in control applications
       Hybrid learning systems
       Mechatronic systems
       Neural networks based control systems
       Optimization algorithms
       Software agents for intelligent control systems
       Soft computing
       Fuzzy control
       Genetic algorithms
       Evolutionary computation and control


AREA 2: ROBOTICS AND AUTOMATION

       Robot design, development and control
       Human-robots interfaces
       Network robotics
       Mobile robots and autonomous systems
       Human augmentation and shared control
       Cybernetics
       Space and underwater robots
       Intelligent transportation technologies and systems
       Vehicle control applications
       Telerobotics and Teleoperation
       Industrial networks and automation
       Intelligent warehouses
       Modeling, simulation and architectures
       Vision, recognition and reconstruction
       Virtual Reality
       Image processing
       Surveillance
       Control and supervision systems
       Web-based control
       Autonomous agents
       Petri nets (system design/verification with nets, protocols and 
networks)
       Reasoning about action for intelligent robots
       Natural language dialogue with robots


AREA 3: SIGNAL PROCESSING, SYSTEMS MODELING AND CONTROL

       Speech recognition
       Signal reconstruction
       Computer and microprocessor-based control
       Hierarchical control
       Instrumentation networks and software
       Field-buses
       Real-time systems control
       Environmental monitoring and control
       Time series and system modeling
       Time-frequency analysis
       Feature extraction
       Information-based models for control
       Discrete event systems
       Hybrid dynamical systems
       System identification
       Adaptive signal processing and control
       Nonlinear signals and systems
       Optimization problems in signal processing
       Change detection problems


KEYNOTE SPEAKERS

Hojjat Adeli, The Ohio State University, U.S.A.
Oleg Gusikhin, Ford Research & Adv.Engineering, U.S.A.
Gerard T. McKee, University of Reading, U.K.
William J O’Connor, University College Dublin, Ireland
Mihaela Ulieru, The University of New Brunswick, Canada
Mark d'Inverno, University of Westminster, U.K.
Norihiro Hagita, ATR Intelligent Robotics and Communication Labs, Japan


TUTORIALS

Industrial Agent Technologies delivered by Mihaela Ulieru, The 
University of New Brunswick, Canada


SPECIAL SESSIONS

There is an open invitation to submit special sessions proposals. Please 
see details on how to submit a special session proposal at 
http://www.icinco.org/Special_Sessions.htm


WORKSHOPS

International Workshop on Multi-Agent Robotic Systems (MARS 2006)
International Workshop on Artificial Neural Networks and Intelligent 
Information Processing (ANNIIP 2006)
International Workshop on Biosignal Processing and Classification (BPC 2006)


PAPER SUBMISSION

Authors should submit a paper in English of up to 8 A4 pages, carefully 
checked for correct grammar and spelling, using the on-line submission 
procedure indicated below.
The guidelines for paper formatting provided at the conference web site 
must be strictly used for all submitted papers. The submission format is 
the same as the camera-ready format. Please check and carefully follow 
the instructions and templates provided.
The program committee will review all papers and the contact author (the 
author who submits the paper) of each paper will be notified of the 
result, by e-mail.
Each paper should clearly indicate the nature of its 
technical/scientific contribution, and the problems, domains or 
environments to which it is applicable.

Submission procedure:
A "double-blind" paper evaluation method will be used. To facilitate 
that, the authors are kindly requested to produce and provide the full 
paper, WITHOUT any reference to any of the authors. The manuscript must 
contain, in its first page, the paper title, an abstract and a list of 
keywords but NO NAMES OR CONTACT DETAILS WHATSOEVER are to be included 
in any part of this file.
The web submission facility automatically sends an acknowledgement, by 
e-mail, to the contact author. Please contact the secretariat if no 
acknowledgement is received.

If the author is unable to use the web-based procedure then he/she can 
send the paper by e-mail to the secretariat attaching an additional file 
containing: the title, author(s), affiliation(s), contact details, a 
list of keywords and an abstract. Authors must also indicate the 
conference area (including the topics) or the workshop, to which the 
paper is submitted.


PUBLICATIONS

All accepted papers will be published in the conference proceedings, 
under an ISBN reference, in paper and in CD-ROM support. A book 
including a selection of the best conference papers will be edited and 
published by Springer.
The International journal Integrated Computer-Aided Engineering and the 
International Journal of Advanced Robotic Systems will also publish a 
selection of ICINCO 2006 best papers.


IMPORTANT DATES

Full Paper Submission: 27th February, 2006
Authors Notification: 17th April, 2006
Final Paper Submission and Registration: 8th May, 2006


SECRETARIAT

ICINCO Secretariat
Address: Av. D.Manuel I, 27A 2ºesq.
               2910-595 Setúbal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
Email:
Web: http://www.icinco.org


VENUE

The conference will be held in the campus of the Polytechnic Institute 
of Setúbal. With five Schools, the Institute has excellent conditions 
for holding conferences, including several 100-seat lecture theatres and 
one fully equipped 350-seat auditorium.
Setúbal, a city with about 75,000 inhabitants, sits by the Atlantic 
Ocean and on the right edge of the Sado River, in front of Tróia, 
approximately 50 km to the south of the Portuguese capital - Lisboa - 
where the nearest airport is located. Setúbal offers its visitors an 
unforgettable environment: Dauphins and other ocean life, monuments and 
flaring landscapes are conjugated with an important industrial 
implantation. The visitor can find anything from ancient historical 
areas, in Palmela, to pleasurable beaches and modern golf courses, in 
Troia. It is also possible to make a break after the conference, in 
Algarve, less than two hours away from the conference site by car.


CONFERENCE CHAIR

Joaquim Filipe, E.S.T. Setúbal, Portugal


HONORARY CHAIR

Hojjat Adeli, The Ohio State University, U.S.A.


PROGRAM CO-CHAIRS

Juan Andrade Cetto, Universitat Autònoma de Barcelona, Spain
Jean-Louis Ferrier, University of Angers, France
José Dias Pereira, E.S.T. Setúbal, Portugal


PROGRAM COMMITTEE

Eugenio Aguirre, University of Granada, Spain
Frank Allgower, University of Stuttgart, Germany
Fouad AL-Sunni, KFUPM, Saudi Arabia
Yacine Amirat, University Paris 12, France
Luis Antunes, GUESS/Universidade de Lisboa, Portugal
Peter Arato, Budapest University of Technology and Economics, Hungary
Helder Araújo, University of Coimbra, Portugal
Gustavo Arroyo-Figueroa, Instituto de Investigaciones Electricas, Mexico
Marco Antonio Arteaga, Universidad Nacional Autonoma de Mexico, Mexico
Nikos Aspragathos, University of Patras, Greece
Miguel Ayala Botto, Instituto Superior Técnico, Portugal
Robert Babuska, TU Delft, Netherlands
Mark Balas, University of Wyoming, U.S.A.
Bijnan Bandyopadhyay, IIT Bombay, India
Ruth Bars, Budapest University of Technology and Economics, Hungary
Karsten Berns, University Kaiserslautern, Germany
Patrick Boucher, SUPELEC, France
Guido Bugmann, University of Plymouth, U.K.
Edmund Burke, University of Nottingham, U.K.
Kevin Burn, University of Sunderland, U.K.
Clifford Burrows, Innovative Manufacturing Research Centre, U.K.
Luis M. Camarinha-Matos, New University of Lisbon, Portugal
Marco Campi, University of Brescia, Italy
Jorge Martins de Carvalho, FEUP, Portugal
Alicia Casals, Technical University of Catalonia, Spain
Christos Cassandras, Boston University, U.S.A.
Raja Chatila, LAAS-CNRS, France
Tongwen Chen, University of Alberta, Canada
Albert M. K. Cheng, University of Houston, U.S.A.
Sung-Bae Cho, Yonsei University, Korea
Ryszard S. Choras, University of Technology & Agriculture, Poland
Carlos Coello Coello, CINVESTAV-IPN, Mexico
António Dourado Correia, University of Coimbra, Portugal
Yechiel Crispin, Embry-Riddle University, U.S.A.
Keshav Dahal, University of Bradford, U.K.
Danilo De Rossi, University of Pisa, Italy
Angel P. del Pobil, Universitat Jaume I, Spain
Guilherme DeSouza, University of Missouri, U.S.A.
Rüdiger Dillmann, University of Karlsruhe, Germany
Denis Dochain, Université catholique de Louvain, Belgium
Alexandre Dolgui, Ecole des Mines de Saint Etienne, France
Marco Dorigo, Université Libre de Bruxelles, Belgium
Wlodzislaw Duch, Nicolaus Copernicus University & NTU, Singapore, Poland
Heinz-Hermann Erbe, TU Berlin, Germany
Gerardo Espinosa-Perez, Universidad Nacional Autonoma de Mexico, Mexico
Simon Fabri, University of Malta, Malta
Jean-Louis Ferrier, Université d'Angers, France
Florin Gheorghe Filip, The Romanian Academy & The National Institute for 
R&D in Informatics, Romania
Manel Frigola, Thecnical University of Catalonia (UPC), Spain
Colin Fyfe, university of paisley, U.K.
Dragan Gamberger, Rudjer Boskovic Institute, Croatia
Lazea Gheorghe, Technical University of Cluj-Napoca, Romania
Maria Gini, University of Minnesota, U.S.A.
Alessandro Giua, University of Cagliari, Italy
Luis Gomes, Universidade Nova de Lisboa, Portugal
John Gray, University of Salford, U.K.
Dongbing Gu, University of Essex, U.K.
José J. Guerrero, University of Zaragoza, Spain
Thomas Gustafsson, Luleå University of Technology, Sweden
Maki K. Habib, Swinburne University of Technology, Malaysia
Hani Hagras, University of Essex, U.K.
Wolfgang Halang, Fernuniversitaet, Germany
J. Hallam, University of Southern Denmark, Denmark
Riad Hammoud, Delphi Corporation , U.S.A.
Uwe D. Hanebeck, Institute of Computer Science and Engineering, Germany
John Harris, University of Florida, U.S.A.
Dominik Henrich, University of Bayreuth, Germany
Francisco Herrera, University of Granada, Spain
Gábor Horváth, Budapest University of Technology and Economics, Hungary
Weng HO, National University of Singapore, Singapore
Alamgir Hossain, Bradford University, U.K.
Marc Van Hulle, K.U.Leuven, Belgium
Atsushi Imiya, IMIT Chiba Uni, Japan
Sirkka-Liisa Jämsä-Jounela, Helsinki University of Technology, Finland
Ray Jarvis, Monash University, Australia
Ivan Kalaykov, Örebro University, Sweden
Nicos Karcanias, City University, London, U.K.
Fakhri Karray, University of waterloo, Canada
Dusko Katic, Mihailo Pupin Institute, Serbia & Montenegro
Kazuhiko Kawamura, Vanderbilt University, U.S.A.
Nicolas Kemper, Universidad Nacional Autónoma de México, Mexico
Graham Kendall, The University of Nottingham, U.K.
Uwe Kiencke, University of Karlsruhe (TH), Germany
Jozef Korbicz, University of Zielona Gora, Poland
Israel Koren, University of Massachusetts, U.S.A.
Bart Kosko, University of Southern California, U.S.A.
Elias Kosmatopoulos, Technical University of Crete, Greece
George L. Kovács, Hungarian Academy of Sciences, Hungary
Krzysztof Kozlowski, Poznan University of Technology, Poland
Gerhard Kraetzschmar, Fraunhofer Institute for Autonomous Intelligent 
Systems, Germany
Anton Kummert, University of Wuppertal, Germany
Jean-Claude Latombe, Stanford University, U.S.A.
Loo Hay Lee, National University of Singapore, Singapore
Graham Leedham, Nanyang Technological University, Singapore
Kauko Leiviskä, University of Oulu, Finland
Zongli Lin, University of Virginia, U.S.A.
Cheng-Yuan Liou, National Taiwan University, Taiwan
Brian Lovell, The University of Queensland, Australia
Peter Luh, University of Connecticut, U.S.A.
Anthony Maciejewski, Colorado State University, U.S.A.
N. P. Mahalik, Gwangju Institute of Science and Technology, Korea
Frederic Maire, Queensland University of Technology, Australia
Bruno Maione, Politecnico di Bari, Italy
Om Malik, University of Calgary, Canada
Jacek Mandziuk, Warsaw University of Technology, Poland
Philippe Martinet, LASMEA, France
Aleix Martinez, Ohio State University, U.S.A.
Rene V. Mayorga, University of Regina, Canada
Gerard McKee, The University of Reading, U.K.
Seán McLoone, National University of Ireland (NUI) Maynooth, Ireland
Basil Mertzios, (1)Thessaloniki Institute of Technology (2) Democritus 
University, Greece
Shin-ichi Minato, Hokkaido University, Japan
José Mireles Jr., Universidad Autonoma de Ciudad Juarez, Mexico
Vladimir Mostyn, VSB - Technical University Ostrava, Czech Republic
Kenneth Muske, Villanova University, U.S.A.
Ould Khessal Nadir, Okanagan College, Canada
Fazel Naghdy, University of Wollongong, Australia
Sergiu Nedevschi, Technical University of Cluj-Napoca, Romania
Maria Neves, Instituto Superior de Engenharia do Porto, Portugal
Hendrik Nijmeijer, Eindhoven University of Technology, The Netherlands
Urbano Nunes, University of Coimbra, Portugal
José Valente de Oliveira, Universidade do Algarve, Portugal
Andrzej Ordys, University of Strathclyde, U.K.
Djamila Ouelhadj, University of Nottingham, ASAP GROUP, U.K.
Michel Parent, INRIA, France
Thomas Parisini, University of Trieste, Italy
Gabriella Pasi, Consiglio Nazionale delle Ricerche, Italy
Witold Pedrycz, University of Alberta, Canada
Carlos Eduardo Pereira, Federal University of Rio Grande do Sul - UFRGS, 
Brazil
Maria Petrou, Imperial College, U.K.
J. Norberto Pires, University of Coimbra, Portugal
Marios Polycarpou, University of Cyprus, Cyprus
Marie-Noëlle Pons, CNRS, France
Libor Preucil, Czech Technical University in Prague, Czech Republic
Bernardete Ribeiro, University of Coimbra, Portugal
M. Isabel Ribeiro, Instituto Superior Técnico, Portugal
Robert Richardson, University of Manchester, U.K.
John Ringwood, National University of Ireland (NUI), Maynooth, Ireland
Juha Röning, University of Oulu, Finland
Agostinho Rosa, IST, Portugal
Hubert Roth, University Siegen, Germany
António Ruano, CSI, Portugal
Erol Sahin, Middle East Technical University, Turkey
Antonio Sala, Universidad Politecnica de Valencia, Spain
Abdel-Badeeh M. Salem, Ain Shams University, Egypt
Ricardo Sanz, Universidad Politécnica de Madrid, Spain
Medha Sarkar, Middle Tennessee State University, U.S.A.
Nilanjan Sarkar, Vanderbilt University, U.S.A.
Jurek Sasiadek, Carleton University, Canada
Carlos Sagüés, University of Zaragoza, Spain
Daniel Sbarbaro, Universidad de Concepcion, Chile
Klaus Schilling, Bayerische Julius-Maximilians Universität Würzburg, Germany
Chi-Ren Shyu, University of Missouri-Columbia, U.S.A.
Bruno Siciliano, Università di Napoli Federico II, Italy
João Silva Sequeira, Instituto Superior Técnico, Portugal
Mark Spong, University of Illinois, U.S.A.
Tarasiewicz Stanislaw, Université Laval, Canada
Aleksandar Stankovic, Northeastern University, U.S.A.
Gerrit van Straten, Wageningen University, Netherlands
Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
Ryszard Tadeusiewicz, AGH University of Science and Technology, Poland
Tianhao Tang, Shanghai Maritime University, China
Daniel Thalmann, EPFL, Switzerland
Gui Yun Tian, University of Huddersfield, U.K.
Ivan Tyukin, RIKEN Brain Science Institute, Japan
Cees van Leeuwen, RIKEN BSI, Japan
Annamaria R. Varkonyi-Koczy, Budapest University of Technology and 
Economics, Hungary
Bernardo Wagner, University of Hannover, Germany
Axel Walthelm, Sepp Med GmbH, Germany
Jun Wang, Chinese University of Hong Kong, China
Lipo Wang, Nanyang Technological University, Singapore
Alfredo Weitzenfeld, ITAM, Mexico
Dirk Wollherr, Technische Universität München, Germany
Sangchul Won, Pohang University of Science and Technology, Korea
Kainam Thomas Wong, University of Waterloo, Canada
Jeremy Wyatt, University of Birmingham, U.K.
Alex Yakovlev, University of Newcastle, U.K.
Hujun Yin, University of Manchester, U.K.
Anibal Zanini, Universidad Nacional de Buenos Aires, Argentina
Yanqing Zhang, Georgia State University, U.S.A.
Dayong Zhou, University of Oklahoma, U.S.A.
Albert Zomaya, The University of Sydney, Australia
Detlef Zuehlke, Technical University Kaiserslautern, Germany


-- 
Juan Andrade Cetto
Centre de Visio per Computador
Universitat Autonoma de Barcelona
Edifici O, Campus UAB, 08193 Bellaterra, Spain
Tel. +34 934010775(IRI) Fax +34 934015750(IRI)
Fax. +34 935811670(CVC) cetto at cvc.uab.es



More information about the robotics-worldwide mailing list