[robotics-worldwide] 8th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2011)

Carla Mota cmota at insticc.org
Wed Feb 16 06:52:29 PST 2011


Dear Sir/ Madam

I would like to know if it is possible to post in your website the following event: 

 

Conference name: 8th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2011)

 

Venue: Noordwijkerhout, The Netherlands

 

Event Date: 28-31 July, 2011

 

 

Scope

 

The purpose of the 8th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Three simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Systems Modeling and Control. 

 

Conference Areas

 

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

 

1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION

2. ROBOTICS AND AUTOMATION

3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELING AND CONTROL

4. INDUSTRIAL ENGINEERING, PRODUCTION AND MANAGEMENT

 

AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION

 

    * Decision Support Systems

    * Distributed Control Systems

    * Expert Systems for Industry

    * Intelligent Fault Detection and Identification

    * Knowledge-based Systems Applications

    * Planning and Scheduling

    * Machine Learning in Control Applications

    * Hybrid Learning Systems

    * Mechatronic Systems

    * Neural Networks based Control Systems

    * Optimization Algorithms

    * Software Agents for Intelligent Control Systems

    * Soft Computing

    * Fuzzy Control

    * Genetic Algorithms

    * Evolutionary Computation and Control

 

AREA 2: ROBOTICS AND AUTOMATION

 

   * Robot Design, Development and Control

    * Human-robots Interfaces

    * Network Robotics

    * Mobile Robots and Autonomous Systems

    * Cybernetics

    * Space and Underwater Robots

    * Intelligent Transportation Technologies and Systems

    * Vehicle Control Applications

    * Telerobotics and Teleoperation

    * Industrial Networks and Automation

    * Modeling, Simulation and Architectures

    * Vision, Recognition and Reconstruction

    * Virtual Reality

    * Image Processing

    * Surveillance

    * Control and Supervision Systems

    * Autonomous Agents

    * Petri Nets (System Design/Verification with Nets, Protocols and Networks)

 

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELING AND CONTROL

 

    * Signal Reconstruction

    * Computer and Microprocessor-based Control

    * Instrumentation Networks and Software

    * Force and Tactile Sensors

    * Mechanical Sensors

    * Sensor Fusion

    * Biological Inspired Sensors

    * Real-time Systems Control

    * Environmental Monitoring and Control

    * Time Series and System Modeling

    * Time-frequency Analysis

    * Information-based Models for Control

    * Discrete Event Systems

    * Hybrid Dynamical Systems

    * System Identification

    * Adaptive Signal Processing and Control

    * Nonlinear Signals and Systems

    * Optimization Problems in Signal Processing

    * Change Detection Problems

 

AREA 4: INDUSTRIAL ENGINEERING, PRODUCTION AND MANAGEMENT

 

    * Lean Enterprise

    * Agile Manufacturing

    * Business Process Modeling

    * Supply Chain and Logistics Engineering

    * Virtual Enterprises and Interoperability

    * Production Planning, Scheduling and Control

    * Computer-based Manufacturing Technologies

    * Systems Modeling and Simulation

    * Facilities Planning and Management

    * Quality Control and Management

    * Energy Efficiency and Green Manufacturing

    * Product-Service Systems

    * Precision Engineering

    * Industrial Automation and Robotics

    * Intelligent Design and Manufacturing

    * Knowledge Management in Industry

 

 

Conference Chair

 

Jean-Louis Ferrier, University of Angers, France

Program co-chairs

 

Kurosh Madani, The University of PARIS EST / PARIS 12, Paris, France

Oleg Gusikhin, Ford Research & Adv. Engineering, U.S.A.

 

 

 

Program Committee

 

James M. Conrad, University of North Carolina Charlotte, United States
Dino Accoto, Università Campus Bio-Medico di Roma, Italy
Andrew Adamatzky, University of the West of England, United Kingdom
Arvin Agah, The University of Kansas, United States
El-Houssaine Aghezzaf, Ghent University, Belgium
Arturo Hernandez Aguirre, Centre For Research In Mathematics, Mexico
Hyo-Sung Ahn, Gwangju Institute of Science and Technology (GIST), Korea, Republic of
Hesham Alfares, King Fahd University of Petroleum and Minerals, Saudi Arabia
Adel Al-Jumaily, University of Technology, Sydney, Australia
Frank Allgower, University of Stuttgart, Germany
Bala Amavasai, Procter & Gamble, United Kingdom
Job Van Amerongen, University of Twente, Netherlands
Francesco Amigoni, Politecnico di Milano, Italy
Stefan Andrei, Lamar University, United States
Peter Arato, Budapest University of Technology and Economics, Hungary
Alejandro Hernandez Arieta, University of Zurich, Switzerland
Carles Batlle Arnau, Universitat Politècnica de Catalunya, Spain
Marco Antonio Arteaga, Universidad Nacional Autonoma de Mexico, Mexico
Vijanth Sagayan Asirvadam, Universiti Teknologi PETRONAS, Malaysia
Ronald Askin, Arizona State University, United States
T. Asokan, Indian Institute of Technology Madras, India
Wudhichai Assawinchaichote, King Mongkut's University of Technology Thonburi, Thailand
Masri Ayob, University Kebangsaan Malaysia, Malaysia
Alireza Bab-hadiashar, Swinburne University of Technology, Australia
Robert Babuska, Delft University of Technology, Netherlands
Jacky Baltes, University of Manitoba, Canada
Ruth Bars, Budapest University of Technology and Economics, Hungary
Victor Becerra, University of Reading, United Kingdom
Laxmidhar Behera, Indian Institute of Technology, Kanpur, India
Gerardo Beni, University of California, Riverside, United States
Karsten Berns, University of Kaiserslautern, Germany
Mauro Birattari, IRIDIA-CoDE, Université Libre de Bruxelles, Belgium
Christian Blum, Universitat Politècnica de Catalunya, Spain
Jean-louis Boimond, ISTIA - LISA, France
Magnus Boman, The Royal Institute of Technology, Sweden
Djamel Bouchaffra, Oakland University, United States
Thomas Braunl, The Univ. of Western Australia, Australia
Davide Brugali, University of Bergamo, Italy
Kevin Burn, University of Sunderland, United Kingdom
Clifford Burrows, Centre for Power Transmission and Motion Control, United Kingdom
Dídac Busquets, Universitat de Girona, Spain
Amauri Caballero, University of Florida, United States
Javier Fernandez de Canete, University of Malaga, Spain
Giuseppe Carbone, LARM - Laboratorio di Robotica e Meccatronica, Italy
Alessandro Casavola, University of Calabria, Italy
Riccardo Cassinis, University of Brescia, Italy
Ratchatin Chanchareon, Chulalongkorn University, Thailand
Pei-Chann Chang, Yuan Ze University, Taiwan, China
Raja Chatila, Laas-cnrs, France
Antonio Chella, Università di Palermo, Italy
F. Frank Chen, University of Texas at San Antonio, United States
Peter C. Y. Chen, National University of Singapore, Singapore
Wen-Hua Chen, Loughborough University, United Kingdom
Yangquan Chen, Utah State University, United States
Yuehui Chen, University of Jinan, China
Yuh-Min Chen, National Cheng Kung University, Taiwan, China
Albert Cheng, University of Houston, United States
Graziano Chesi, University of Hong Kong, China
Tsung-Che Chiang, National Taiwan Normal University, Taiwan, China
Chen-Fu Chien, Taiwan Semiconductor Manufacturing, China
Sung-Bae Cho, Yonsei University, Korea, Republic of
Ryszard S. Choras, University of Technology & Life Sciences, Poland
Chengbin Chu, Ecole Centrale Paris, France
Carlos Coello Coello, CINVESTAV-IPN, Mexico
António Dourado Correia, University of Coimbra, Portugal
José Boaventura Cunha, University of Trás-os-montes and Alto Douro, Portugal
Jian S. Dai, King's College London, United Kingdom
Prithviraj (Raj) Dasgupta, University of Nebraska, United States
Matthias Dehmer, University of Coimbra, Portugal
Michael A. Demetriou, Worcester Polytechnic Institute, United States
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Xinyan Deng, University of Delaware, United States
Mohamed Deriche, KFUPM, Saudi Arabia
Guilherme DeSouza, University of Missouri, United States
Rüdiger Dillmann, University of Karlsruhe, Germany
Denis Dochain, Université Catholique de Louvain, Belgium
Tony Dodd, The University of Sheffield, United Kingdom
Alexandre Dolgui, Ecole des Mines de Saint Etienne, France
Venky Dubey, Bournemouth University, United Kingdom
Frederick Ducatelle, Istituto Dalle Molle di Studi sull'Intelligenza Artificiale (IDSIA), Switzerland
Ashish Dutta, Indian Institute of Technology Kanpur, India
Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
Mohammed El-Abd, American University of Kuwait, Kuwait
Eniko Enikov, The University of Arizona, United States
Ali Eydgahi, Eastern Michigan University, United States
Simon G. Fabri, University of Malta, Malta
Jean-Marc Faure, Ecole Normale Superieure de Cachan, France
Paolo Fiorini, University of Verona, Italy
Juan J. Flores, University of Michoacan, Mexico
Heinz Frank, Heilbronn University Campus Kuenzelsau, Germany
Georg Frey, Saarland University, Germany
Manel Frigola, Technical University of Catalonia (UPC), Spain
Ponnambalam S G, MONASH UNIVERSITY SUNWAY CAMPUS, Malaysia
Leonid Gelman, Cranfield University, United Kingdom
Ryszard Gessing, Silesian University of Technology, Poland
Lazea Gheorghe, Technical University of Cluj-Napoca, Romania
Paulo Gil, Universidade Nova de Lisboa, Portugal
Maria Gini, University of Minnesota, United States
Alessandro Giua, University of Cagliari, Italy
Alain Glumineau, Irccyn, France
Luis Gomes, Universidade Nova de Lisboa, Portugal
Bhaskaran Gopalakrishnan, West Virginia University, United States
Kannan Govindan, University of Southern Denmark, Denmark
Ole-Christoffer Granmo, University of Agder, Norway
Frans C. A Groen, University of Amsterdam, Netherlands
Jason Gu, Dalhousie University, Canada
Da-Wei Gu, University of Leicester, United Kingdom
Kevin Guelton, University of Reims Champagne-Ardenne, France
José J. Guerrero, Universidad de Zaragoza, Spain
Lei Guo, Chinese Academy of Sciences (CAS), China
Jatinder Gupta, University of Alabama in Huntsville, United States
Thomas Gustafsson, Luleå University of Technology, Sweden
Quang Phuc Ha, University of Technology, Sydney, Australia
Maki K. Habib, The American University in Cairo, Egypt
Hani Hagras, University of Essex, United Kingdom
Juergen Hahn, Texas A&M University, United States
Wolfgang Halang, Fernuniversitaet, Germany
John Hallam, University of Southern Denmark, Denmark
Riad Hammoud, Dynavox Technologies, United States
Onur Hamsici, Qualcomm, United States
Qing-Long Han,  , Australia
Jennifer Harding, Loughborough University, United Kingdom
Dominik Henrich, University of Bayreuth, Germany
Suranga Hettiarachchi, Indiana University Southeast, United States
Victor Hinostroza, University of Ciudad Juarez, Mexico
Kaoru Hirota, Tokyo Institute of Technology, Japan
Alamgir Hossain, Bradford University, United Kingdom
M. Ani Hsieh, Drexel University, United States
S. Jack Hu, University of Michigan, United States
Guoqiang Hu, Kansas State University, United States
Biao Huang, University of Alberta, Canada
Fumiya Iida, ETH Zurich, Switzerland
Atsushi Imiya, IMIT Chiba University, Japan
Giovanni Indiveri, University of Salento, Italy
Hisao Ishibuchi, Osaka Prefecture University, Japan
Mirjana Ivanovic, Faculty of Sciences, University of Novi Sad, Serbia
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Ray Jarvis, Monash University, Australia
Thira Jearsiripongkul, Thammasat University, Thailand
Myong K. Jeong, Rutgers University, United States
Ivan Kalaykov, Örebro University, Sweden
Michail Kalogiannakis, University of Crete, Greece
Mansour Karkoub, Texas A&M University, Qatar
Dimitrios Karras, Chalkis Institute of Technology, Greece
Fakhri Karray, University of Waterloo, Canada
Dusko Katic, Mihailo Pupin Institute, Serbia
DaeEun Kim, Yonsei University, Korea, Republic of
Jonghwa Kim, University of Augsburg, Germany
Won-jong Kim, Texas A&M University, United States
Diego Klabjan, Northwestern University, United States
Ashok K. Kochhar, Aston University, United Kingdom
Siau Siau Ching Lenny Koh, University of Sheffield, United Kingdom
Lingxue Kong, University of South Australia, Australia
Waree Kongprawechnon, Thammasat University, Thailand
Israel Koren, University of Massachusetts, United States
Bart Kosko, University of Southern California, United States
George L. Kovács, Hungarian Academy of Sciences, Hungary
Krzysztof Kozlowski, Poznan University of Technology, Poland
Gerhard K. Kraetzschmar, Bonn-Rhine-Sieg University of Applied Sciences, Germany
Mianowski Krzysztof, Politechnika Warszawska, Poland
Kin keung Lai, City University of Hong Kong, Hong Kong, China
H. K. Lam, King's College London, United Kingdom
Pierre Lambert, University of Tokyo, Japan
Soo-young Lee, KAIST, Korea, Republic of
Kauko Leiviskä, University of Oulu, Finland
Kang Li, Queen's University Belfast, United Kingdom
Tsai-Yen Li, National Chengchi University, Taiwan, China
Yangmin Li, University of Macau, China
Gordon Lightbody, University College Cork, Ireland
Huei-Yung Lin,  National Chung Cheng University, Taiwan, China
Guoping Liu, University of Glamorgan, United Kingdom
Honghai Liu, University of Portsmouth, United Kingdom
Xiaoping Liu, Carleton University, Canada
Gonzalo Lopez, Universidad de Zaragoza, Spain
Iuan-Yuan Lu, National Sun Yat-sen University, Taiwan, China
Edwin Lughofer, Johannes Kepler University, Austria
Martin Lukac, Tohoku University, Japan
José Tenreiro Machado, Institute of Engineering of Porto, Portugal
Anthony Maciejewski, Colorado State University, United States
Chitralekha Mahanta, IIT Guwahati, India
Bruno Maione, Politecnico Di Bari, Italy
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Hervé Marchand, INRIA, France
Philippe Martinet, Lasmea, France
Sonia Martínez, Mechanical and Aerospace Engineering department, UC San Diego, United States
Aníbal Matos, Faculdade De Engenharia Da Universidade Do Porto (feup), Portugal
Constantinos Mavroidis, Northeastern University, United States
Rene V. Mayorga, University of Regina, Canada
Ken Mcgarry, University of Sunderland, United Kingdom
Seán McLoone, National University of Ireland (NUI) Maynooth, Ireland
Carlo Menon, Simon Fraser University, Canada
Wasfy B. Mikhael, Univerisity of Central Florida, United States
Patrick Millot, University of Valenciennes, France
Sanya Mitaim, Thammasat University, Thailand
S. Ali A. Moosavian, K. N. Toosi Univ. of Technology, Iran, Islamic Republic of
Francesco Carlo Morabito, University Mediterranea of Reggio Calabria, Italy
António Paulo Moreira, INESC Porto / FEUP, Portugal
Pieter Mosterman, MathWorks, United States
Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
Fazel Naghdy, University of Wollongong, Australia
Zoltan Nagy, Loughborough University, United Kingdom
Saeid Nahavandi, Deakin University, Australia
David Naso, Politecnico Di Bari, Italy
Andreas Nearchou, University of Patras, Greece
Luciana Nedel, Universidade Federal do Rio Grande do Sul (UFRGS), Brazil
Nadia Nedjah, State University of Rio de Janeiro, Brazil
Maria Neves, Instituto Superior De Engenharia Do Porto, Portugal
Robert W Newcomb, University of Maryland, United States
Hendrik Nijmeijer, Eindhoven University of Technology, Netherlands
Urbano Nunes, University of Coimbra, Portugal
José Valente de Oliveira, Universidade do Algarve, Portugal
H.R.B. Orlande, Federal University of of Rio de Janeiro, Brazil
Manuel Ortigueira, Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, Portugal
Djamila Ouelhadj, ALMMG (Logistics and Mathematics Management Group), United Kingdom
Mourad Oussalah, University of Birmingham, United Kingdom
Christos Panayiotou, University of Cyprus, Cyprus
Stefano Panzieri, Università degli Studi "Roma Tre", Italy
Michel Parent, Inria, France
Gwi Tae Park, Korea University, Korea, Republic of
Igor Paromtchik, INRIA, France
Bozenna Pasik-Duncan, University of Kansas, United States
Mario Pavone, University of Catania, Italy
Pierre Payeur, University of Ottawa, Canada
Carlos Eduardo Pereira, Federal University of Rio Grande Do Sul - Ufrgs, Brazil
D. T. Pham, Cardiff University, United Kingdom
Jeff Pieper, ., Canada
Selwyn Piramuthu, University of Florida, United States
Angel P. Del Pobil, Universitat Jaume I, Spain
Marie-Noëlle Pons, CNRS, France
Vittal Prabhu, The Pennsylvania State University, United States
Raul Marin Prades, Jaume I University, Spain
José Ragot, Centre de Recherche en Automatique de Nancy, France
A. Fernando Ribeiro, Universidade do Minho, Portugal
Mihailo Ristic, Imperial College London, United Kingdom
Rodney Roberts, Florida State University, United States
Eduardo Rocon, Instituto de Automatica Industrial, Spain
Juha Röning, University of Oulu, Finland
Mehdi Roopaei, Fars Research and Science - Islamic Azad University, Iran, Islamic Republic of
Agostinho Rosa, IST, Portugal
Danilo De Rossi, University of Pisa, Italy
Carlos Sagüés, University of Zaragoza, Spain
Mehmet Sahinkaya, University of Bath, United Kingdom
Priti Srinivas Sajja, Sardar Patel University, India
Antonio Sala, Universidad Politecnica de Valencia, Spain
Abdel-badeeh Mohamed Salem, Ain Shams University, Egypt
Marcello Sanguineti, University of Genoa, Italy
Elena De Santis, University of L'Aquila, Italy
Srikanth Saripalli, Arizona State University, United States
Nilanjan Sarkar, Vanderbilt University, United States
Jurek Sasiadek, Carleton University, Canada
Hideyuki Sawada, Kagawa University, Japan
Daniel Sbarbaro, Universidad de Concepcion, Chile
Klaus Schilling, University Würzburg, Germany
Henning Schmidt, Fraunhofer Institute for Production Systems and Design Technology (IPK), Germany
Carla Seatzu, University of Cagliari, Italy
Ali Selamat, Universiti Teknologi Malaysia, Malaysia
Lakmal Seneviratne, King's College London, United Kingdom
Michael Short, Teesside University, United Kingdom
Silvio Simani, University of Ferrara, Italy
Dan Simon, Cleveland State University, United States
Olivier Simonin, INRIA - LORIA, France
Joaquin Sitte, Queensland University of Technology, New Zealand
Adam Slowik, Koszalin University of Technology, Poland
Andrzej Sluzek, Nanyang Technological University/Nicolaus Copernicus University, Singapore
Safeeullah Soomro, Yanbu University College, Saudi Arabia
Stefano Squartini, Polytechnic University of Marche, Italy
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
Sergiu Stan, Technical University of Cluj-Napoca, Romania
Tarasiewicz Stanislaw, Université Laval, Canada
A. Frank Van Der Stappen, Utrecht University, Netherlands
J.D. Stigter, Wageningen University, Netherlands
Olaf Stursberg, University of Kassel, Germany
Chun-Yi Su, Concordia University, Canada
Raúl Suárez, Universitat Politecnica De Catalunya (upc), Spain
Kamesh Subbarao, University of Texas at Arlington, United States
Kazuya Takeda, Nagoya University, Japan
Choon Yik Tang, University of Oklahoma, United States
József K. Tar, Budapest Tech Polytechnical Institution, Hungary
Daniel Thalmann, Nanyang Technological University, Singapore
Haydn A. Thompson, University of Sheffield, United Kingdom
Gui Yun Tian, Newcastle University, United Kingdom
N. G. Tsagarakis, Istituto Italiano di Tecnologia, Italy
Avgoustos Tsinakos, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos, Cranfield University (Cranfield Defence and Security), United Kingdom
Nikos Tsourveloudis, Technical University of Crete, Greece
Ivan Tyukin, Department of Mathematics, University of Leicester, United Kingdom
Anthony Tzes, University of Patras, Greece
Masaru Uchiyama, Tohoku University, Japan
Dariusz Ucinski, University of Zielona Gora, Poland
Angel Valera, Universidad Politécnica de Valencia, Spain
Bram Vanderborght, Vrije Universiteit Brussel, Belgium
Ramiro Velazquez, Universidad Panamericana, Mexico
Ljubo Vlacic, Griffith University, Australia
Damir Vrancic, Jožef Stefan Institute, Slovenia
Eric Wade, USC Division of Biokinesiology and Physical Therapy, United States
Zidong Wang, Brunel University, United Kingdom
James Whidborne, Cranfield University, United Kingdom
Sangchul Won, Pohang University of Science and Technology, Korea, Republic of
Qishi Wu, University of Memphis, United States
Xun W. Xu, University of Auckland, New Zealand
Bin Yao, Purdue University, United States
Kang Kenneth Yen, University of Florida, United States
Marek Zaremba, Université du Québec (UQO), Canada
Janan Zaytoon, University of Reims Champagne Ardennes, France
Hongbin Zha, Peking University, China
Du Zhang, California State University, United States
K. Zhou, Louisiana State University, United States
Loredana Zollo, Università Campus Bio-Medico, Italy
Argyrios Zolotas, Loughborough University, United Kingdom 

(list not yet complete)

 

 

Important Dates

 

Conference date: 28-31 July, 2011

Regular Paper Submission: February 21, 2011 (extended)
Authors Notification (regular papers): April 5, 2011
Final Regular Paper Submission and Registration: April 29, 2011

 

Secretariat

 

ICINCO Secretariat

Address: Av. D. Manuel I, 27A, 2º esq.

             2910-595 Setúbal - Portugal

Tel.: +351 265 520 185

Fax: +44 203 014 5435

e-mail: icinco.secretariat at insticc.org

Web: http://www.icinco.org/

 

 



More information about the robotics-worldwide mailing list