[robotics-worldwide] CFPs: Invited session on Civil Infrastructure and Construction Automation at 9th IEEE International Conference on Automation Science and Engineering

Dikai Liu Dikai.Liu at uts.edu.au
Tue Jan 8 13:46:57 PST 2013


We would like to invite you for possible contributions to the Invited Session on Civil Infrastructure and Construction Automation at the upcoming 2013 IEEE International Conference on Automation Science and Engineering (IEEE CASE'13) on August 17-21, 2013 in Madison, Wisconsin, USA. The Call for Papers of the invited session is detailed in the attached pdf file.

The IEEE CASE'13, sponsored by the IEEE Robotics and Automation Society (RAS), is the flagship automation conference of the IEEE RAS. IEEE CASE 2013 will offer a special session on civil infrastructure and construction automation. You are invited to present your research results in the areas of the use of the automation science and technologies for sustainable and resilient civil infrastructure. Topics of interest include, but are not limited to:

 *   Novel robotics technologies and applications in civil infrastructure construction and maintenance
 *   New sensing technologies and data fusion for condition assessment of civil infrastructure
 *   Structural health monitoring of civil infrastructure
 *   Modeling, simulation and optimization of risk management for civil infrastructure
 *   Automated maintenance, rehabilitation and repair of civil infrastructure
 *   Integration and automation of sensing technologies for infrastructure management
 *   Autonomous platforms and remote sensing for post-disaster response and recovery
 *   Novel data collection methods for asset mapping and management





Important Dates

 *   February 11, 2013: Title and abstract of the paper (to any of the following organizers)
 *   March 1, 2013:       Full paper submission (via https://ras.papercept.net/conferences/scripts/start.pl)
 *   May 15, 2013:        Acceptance/Rejection notification
 *   June 15, 2013:        Final camera-ready papers due in electronic form
For additional information on IEEE CASE 2013 please visit http://www.case2013.org. Please address inquiries regarding the special session to one of the organizers.

Professor Jingang Yi

Department of Mechanical and Aerospace Engineering

Rutgers, The State University of New Jersey

Piscataway, New Jersey 08854, USA

Email: jgyi at rutgers.edu<mailto:jgyi at rutgers.edu>



Professor Dikai Liu
Faculty of Engineering and Information Technology
University of Technology, Sydney
Broadway, NSW 2007, Australia
Email: dikai.liu at uts.edu.au<file:///C:\Users\jgyi\AppData\Local\Microsoft\Windows\Users\jgyi\AppData\Local\Microsoft\Windows\Temporary%20Internet%20Files\Content.Outlook\AppData\Local\Microsoft\Windows\Temporary%20Internet%20Files\Content.IE5\IXAVJUNU\dikai.liu@uts.edu.au>

Professor Nenad Gucunski
Department of Civil and Environmental Engineering

Rutgers, The State University of New Jersey

Piscataway, New Jersey 08854, USA
Email: gucunski at rci.rutgers.edu<mailto:jg931 at rci.rutgers.edu>



Professor Jie Gong
Department of Civil and Environmental Engineering

Rutgers, The State University of New Jersey

Piscataway, New Jersey 08854, USA
Email: jg931 at rci.rutgers.edu<mailto:jg931 at rci.rutgers.edu>

Thanks for your attention.

UTS CRICOS Provider Code: 00099F
DISCLAIMER: This email message and any accompanying attachments may contain confidential information.
If you are not the intended recipient, do not read, use, disseminate, distribute or copy this message or
attachments. If you have received this message in error, please notify the sender immediately and delete
this message. Any views expressed in this message are those of the individual sender, except where the
sender expressly, and with authority, states them to be the views of the University of Technology Sydney.
Before opening any attachments, please check them for viruses and defects.

Think. Green. Do.

Please consider the environment before printing this email.


More information about the robotics-worldwide mailing list